CRMRC member's projects and certifications

 

Shanmugam G. got his L1 certification with his custom Golden Goose rocket on a CTI H140 Classic motor at our St. Albans field on Dec. 16, 2023. Launch video is HERE

David L. got his L1 certification with his Apogee Zephyr rocket on a CTI H125 White motor at our St. Albans field on Dec. 16, 2023. Launch video is HERE

Riley W. got his L1 certification with his MAC Fast Food rocket on an Aerotech H100 White Lightning motor at our St. Albans field on Nov. 5, 2023. Launch video is HERE

Scott L. got his L2 certification with his MAC Scorpion on an Aerotech J270 White Lightning motor at our St. Albans field on May 27, 2023. Launch video is HERE

Rick D. got his L1 certification with his Apogee Zephyr on an Aerotech H100 White Lightning motor at our St. Albans field on May 27, 2023. Launch video is HERE

Stewart L. got his L1 certification with his Wildman Cherokee on a CTI H90 Classic motor at our St. Albans field on April 15, 2023. Launch video is HERE

John S. got his L1 certification with his Madcow Patriot on a CTI H100 White motor at our St. Albans field on April 15, 2023. Launch video is HERE

Patrick M. got his L1 certification with his custom-built "Small Owl" on an Aerotech H45 White motor at our St. Albans field on April 15, 2023. Launch video is HERE

Patrick M. got his L2 certification with his custom-built "Small Owl" on a Aerotech J350 While Lightning motor at our St. Albans field on April 15, 2023. Launch video is HERE

Henry L. got his L2 certification with his custom-built "Ground Goblin" on a CTI J250 Skidmark motor at our St. Albans field on April 15, 2023. Launch video is HERE

Daniel O. got his L1 certification with his custom-built "Plain Bagel" on a CTI H200 Blue Streak motor at our St. Albans field on April 15, 2023. Launch video is HERE

Troy O. got his L2 certification with his custom-built "Spare Parts" on a CTI J760 White Thunder motor at our St. Albans field on April 15, 2023. Launch video is HERE

Arjun got his L2 certification with his custom-built "Hornet " on an Aerotech J500 Mojave Green motor at our St. Albans field on April 15, 2023. Launch video is HERE

Heather "Jamie" P. got her L1 certification with her custom-built "Mango Smoothie" on a CTI H135 White motor at our St. Albans field on April 15, 2023. Launch video is HERE

Terence T. got his L1 certification with his custom-built "Raptor" on a CTI H133 Blue Streak motor at our St. Albans field on April 15, 2023. Launch video is HERE

Michael B. got his L1 certification with his custom-built "Viper" on a CTI H90 Classic motor at our St. Albans field on April 15, 2023. Launch video is HERE

Liam C. got his L1 certification with his custom-built "Hair of the Dog" on a CTI H123 Skidmark motor at our St. Albans field on February 18, 2023. Launch video is HERE

Cisco H. got her L2 certification with his custom-built "Drag Queen" on an CTI J425 Blue Streak motor at our St. Albans field on February 18, 2023. Launch video is HERE

Nico M. got his L2 certification with his custom-built "Silver Bullet" on an CTI J285 Classic motor at our St. Albans field on February 18, 2023. Launch video is HERE. Launchpad view video is HERE

James H. got his L1 certification with his custom-built Onyx on an CTI I345 White motor at our St. Albans field on December 21, 2022. Launch video is HERE

David M. got his L1 certification with his custom-built Smokey Quartz on a CTI H118 Classic motor at our St. Albans field on December 21, 2022. Launch video is HERE

Jeffrey M. got his L1 certification with his custom-built Onyx-1 on an CTI H118 Classic motor at our St. Albans field on December 21, 2022. Launch video is HERE

Matthew S. got his L2 certification with his custom-built Exp 2 on an AT K850 Dark Matter motor at our St. Albans field on November 19, 2022.

Ryan G. got his L2 certification with his custom-built SBR Thor on an AT J450 Dark Matter motor at our St. Albans field on November 19, 2022. Flight video is HERE.

Matthew S. got his L1 certification with his custom-built NAM on a CTI I218 White Thunder motor at our St. Albans field on October 22, 2022. Flight video is HERE.

Ryan G. got his L1 certification with his Apogee Zephyr, on an Aerotech H283ST Super Thunder motor at our St. Albans field on July 16, 2022. Flight video is HERE.

Stan W. got his L2 certification with his MAC 4-inch Black Fly, on a CTI J335 Red long burn motor at our St. Albans field on Apr. 23, 2022. Flight video is HERE.

James S. got his L3 certification with his 51 lb, 6 in. dia. 11' tall Ultimate Wildman, on a CTI M1810 Redline motor at Red Glare on Apr. 2, 2022. Flight video is HERE. Liftoff Photo is HERE. Outline of his certification plan is HERE.

Constantine got his L2 certification with his LOC/Precision IRIS on a AT J275 White motor at our St. Albans field on Apr. 2, 2022. Flight video is HERE

Scott L. got his L1 certification with his MAC Scorpion on a AT H128 Red motor at our St. Albans field on Apr. 2, 2022. Flight video is HERE

Constantine C. got his L1 certification with his LOC EZI-65 on a AT H123 White motor at our St. Albans field on Nov. 21, 2021. Flight video is HERE

Chuck C. got his L1 certification with his LOC Goblin on a CTI H123 Skidmark motor at our St. Albans field on Nov. 21, 2021. Flight video is HERE

Joseph B. got his L1 certification with his Binder Excelsior on a CTI H143 Smokey Sam motor at our St. Albans field on Nov. 21, 2021. Flight video is HERE

Stan got his L1 certification with his LOC IV on a CTI H123 Skidmark motor at our St. Albans field on Oct. 24, 2021. Flight video is HERE

Doug. G got his L2 certification with his MAC Performance VTS on a J326LR motor at our St. Albans field on Oct. 24, 2021. Flight video is HERE

Bjorn got his L2 certification with his custom No-Thank-You rocket on a CTI J285 Classic motor at our St. Albans field on Oct. 24, 2021. Flight video is HERE

Dan B. got his L1 certification with his custom-built MRS V3 M2 with Aerotech I59 White Lightning/Warp 9 motor at our St. Albans field on Sep. 19, 2021. Flight video is HERE

Kartikey A. got his L2 certification with his scratch-built Super Guppy with a CTI J335 Red motor at our St. Albans field on Sep. 19, 2021.

Ben H. got his L2 certification with his Scratch-built Traffic Violation on a CTI J285 Classic motor at our St. Albans field on May 15, 2021. Flight video is HERE

Ryan R. got his L2 certification with his Scratch-built Leominster on a CTI J290 White motor at our St. Albans field on May 15, 2021. Flight video is HERE

Doug G. got his L1 certification with his MAC Bolt on an Aerotech H169 White Lightning motor at our St. Albans field on May 15, 2021. Flight video is HERE

Kevin K. got his L2 certification with his Madcow Super DX3 on a CTI J400 Smoky Sam motor at our St. Albans field on April 24, 2021. Flight video is HERE

John A. got his L2 certification with his Little John on a CTI J381 Skidmark motor at our St. Albans field on December 19, 2020. Flight video is HERE

Noah G. got his L1 certification with his MAC Performance Arcas on a CTI H255 White Thunder motor at our St. Albans field on October 17, 2020. Flight video is HERE

Dave and Molly's 5 year old grandson Matty L. launched his first rocket, an Estes Tigres which he built himself. Flight was conducted in Montreal on July 14, 2020 because of Covid-19 US/Canada border closure. Matty used an A8-3 motor for a picture perfect launch and recovery. Matty is the club's youngest rocketeer. Flight video is HERE

Alex S. got his Junior L1 Certification with his Apogee Zephyr on AeroTech H219 Blue motor at our St. Albans field on June 20, 2020. Flight video is HERE

Kavya V. got her L1 certification with her Binder Design Excel on an AT H165 Red motor at our St. Albans field on November 16, 2019. A video of her flight is HERE

Kevin K. got his L1 certification with his Super DX-3 on a CTI H225 White Thunder motor at our St. Albans field on November 16, 2019. A video of his flight is HERE

Matt G. got his L2 certification with his LOC VII on a CTI J760 White Thunder motor at our St. Albans field on September 21, 2019. A video of his flight is HERE

Carolyn P. got her L1 certification with her MAC Zodiac on an AT H165 Red motor at our St. Albans field on September 21, 2019. a video of her flight is HERE

Gareth W. got his L1 certification with his Estes Leviathan, on an AT H135 White motor at our St. Albans field on September 21, 2019. A video of his flight is HERE

Ebbed L. got his Junior L1 certification with his Madcow Honest John on a CTI H53 mellow motor at our St. Albans field on August 18, 2019. Flight video is HERE

Andy S. obtained his L1 certification with his 4" Mac Performance Menace flying on a CTI H123 Skidmark motor at our St. Albans field on August 18, 2019. Flight video is HERE

Hugues L. got his L1 certification with his Madcow DX3 flying an Aerotech DMS H135 White motor at our St. Albans field on June 15, 2019. Flight video is HERE

Lawrence H. got his Level 1 certification with his scratch built 2.7" Steampunk on an AT H220 Blue Thunder motor at our St. Albans field on May 18, 2019. Flight video is HERE

Matt G. got his his Level 1 certification with his MacPerformance Ethos on a CTI H152 Blue Streak motor at our St. Albans field on May 18, 2019. Flight video is HERE

Claude I. got his his Level 1 certification with his naked PML Phobos on an Aerotech H182 Red Motor at our St. Albans field on September 15, 2018. Flight video is HERE

John A. got his his Level 1 certification with his naked Madcow Little John on a CTI I345 White Thunder Motor at our St. Albans field on August 19, 2018. Flight video is HERE

Bob F. got his Level 1 certification with his LOC Iris on a CTI I125 Longburn motor at our St. Albans field on August 19, 2018. Flight video is HERE

Ken M. got his Level 2 certification with his Madcow Super DX3 on a Aerotech J270 Smokey White motor at our St. Albans field on July 21, 2018. Flight video is HERE

Jim V. got his Level 2 certification with his Wildman 1/4 scale Patriot on a CTI J280 Smokey Sam motor at our St. Albans field on April 22, 2018. Flight video is HERE

Matt L. got his Level 1 certification with his LOC Iris on a CTI H152 Blue Streak motor at our St. Albans field on April 22, 2018. Flight video is HERE

Ben G. got his Junior Level 1 certification with his Vesta rocket using a CTI H90 Classic motor at our St. Albans field on March 18, 2018. Flight video is HERE

Paul S. got his Level 2 certification flight with his Madcow Super DX3 using an AT J350 White motor at our St. Albans field on Mar. 18, 2018. Flight video is HERE

Arun C. got his Level 1 certification with his custom red black and gold rocket called "NUSC In Amber Clad" using a CTI H152 Blue Streak motor at our St. Albans field on Mar. 4, 2018.

James S. got his Level 2 certification with his Madcow Super DX-3 using a CTI J330 Classic motor at our St. Albans field on Feb. 17, 2018. Flight video is HERE

Ken got his Level 1 certification with his Madcow OFR-72 using a CTI H120 Red Lightning motor at our St. Albans field on Sep. 16, 2017.

Monty got his Level 1 certification with his "Cooler Spool" using an Aerotech I200 White Lightning motor at our St. Albans field on Sep. 16, 2017.

Clare S. got her Level 1 certification with her Loc Hi-Tech named "Pip Boy" using a CTI I303 Blue Streak motor at our St. Albans field on August 18, 2017.

Kevin T. got his Level 1 certification with his Wildman Darkstar Jr. using an Aerotech H180 White Lightning motor at our St. Albans field on Oct. 21, 2016. Flight video is HERE

Jim V. got his Level 1 certification with his 4" Mega Der Red Max using an Aerotech H128 White Lightning motor at our St. Albans field on May 21, 2016. Flight video is HERE

Meredith C. got her Level 2 certification with her Apogee Components "Level 2." kit using a CTI J293 blue streak motor at our St. Albans field on March 20, 2016. Flight photo is HERE

Dan S. got his Level 1 certification with his Madcow Phoenix using an Aerotech H130 White motor at our St. Albans field on March 20, 2016. Flight photo is HERE

Meredith C. got her Level 1 certification with her PML Callisto using an Aerotech DMS H115 Dark Matter motor at our St. Albans field on February 28, 2016. Flight photo is HERE

Molly H. got her Level 1 certification with her scratch-built Crayon rocket dubbed "Purple Haze" using a CTI H123 Skidmark motor at URRF on June 28, 2014. Flight photo is HERE

Dave Lang. got his Level 3 certification with his modified Gizmo XL rocket dubbed "SLUGGO" using a CTI M2250 C-Star motor at Red Glare XIII on November 17, 2012. Click HERE for an outline of his project. Ground video is HERE. Onboard video is HERE

Jeff O. got his Level 3 certification with his scratch built, scale Tomakawk using an Aerotech M1500 Green motor at NERRF 8 on June 23, 2012. Click HERE for an outline of his project.

Charlie H. completed his Level 1 certification with his LOC Phantom and a CTI H100 Imax motor August 27, 2011.

Jason V. completed his Level 2 certification with his Polecat Pershing II and a CTI J285 Classic motor August 27, 2011. Click HERE for his L2 project page. The onboard video of the certification flight is HERE.

Howie D. completed his Level 3 certification with his Ultimate Wildman and a CTI M1770 Skidmark motor June 25, 2011. Click HERE for an outline of the project. Click HERE for a photo album.

Dave Lang completed his Level 2 certification with his Performance X-celerator and a CTI J355 Redline motor June 25, 2011. Click HERE for a photo description. Click HERE for the onboard video.

Dave Lang completed his Level 1 certification with his PML Matrix and a CTI H118 Classic motor May 16, 2010.

Guest Mark N. completed his Level 2 certification with his DGA Armageddon and an AT J540 Redline motor Dec. 9, 2009.

Tom Oliver completed his Level 3 certification at NERRF 5 with his Competitor 6 Climb-Maxx Aug. 16, 2009.

Doug S. completed his Level 2 certification with his Escape Velocity 2.6 and an AT J350 White Lightning motor July 25, 2009.

Scott T. completed his Level 2 certification at NYPower on July 9, 2009.

Karin A. completed her Level 1 certification with her Giant Leap Thunderbolt and a CTI G133 Smokey Sam July 6, 2009.

Bill C. completed his Level 2 certification with his 3" AMRAAM and an AT J350 White Lightning motor July 3, 2009.

Ian C. completed his Level 2 certification with his PML Quantum Leap and an AT J350 White Lightning motor July 3, 2009.

Brian A. completed his Level 1 certification with a G. L. Vertical Assault on an AT J350 White Lightning motor May 16, 2009.

Jason V. completed his Level 1 certification with his PML AMRAAM and an AMW H120 Red motor May 16, 2009.

Jeff O. completed his Level 2 certification with his 4X upscaled Estes Alpha and a ATJ275 White Lightning motor April 18, 2009.

Chris M. completed his Level 1 certification with his Bull Puppy and an AT H165 Redline motor April 18, 2009.

Doug S. completed his Level 1 certification with his PML Bull Puppy 3 and an AT H148 Redline motor March 22, 2009.

Mark M. completed his Level 1 certification with his PML Explorer and an AT H128 White Lightning motor March 22, 2009.

Ian C. completed his Level 1 certification with his PML Quasar and an AT H97J motor October 18, 2008.

Bill C. completed his Level 1 certification with his PML AMRAM 3 October 18, 2008.

Tom O. completed his Level 2 certification with his PML Miranda and an AT J350 White Lightning motor August 17, 2008.

Kevin O'Classen completed his Level 3 certification with his "Dr. Fill" and a Contrail M2281 hybrid motor July 25th, 2008. Click HERE for an outline of his project. Launch photo HERE.

Jeff R. completed his Level 1 certification with his Aerotech Sumo on an AT H128 White Lightning motor July 19, 2008.

Tom O. completed his Level 1 certification with his PML Miranda May 25, 2008.

Jeff O. completed his Level 1 certification with his PML Bull Puppy and an H smokey motor May 25, 2008.